Calibration Modes Explained

Calibration enables the microbolometer temperature background to be reset and defects in the image
(such as vertical lines, phantom images etc.) to be eliminated.
There are three calibration modes: manual (M), semi-automatic (SA) and automatic (A).
Select the required mode in the “Calibration” section.
• M mode (manual). Secure the lens cap and briefly press the ON button. After completing the calibration
process, remove the lens cap.
• SA mode (semi-automatic). Calibration is engaged by a brief press of the ON button (3). The lens cap need not be secured (the sensor is closed by an internal shutter).
• A Mode (automatic) The riflescope is calibrated automatically in accordance with the software algorithm. The lens cap need not be secured (the sensor is closed by an internal shutter). In this mode, the riflescope may be calibrated by the user with the ON button, like semi-automatic.

For further assistance please submit a request located in the top right hand corner of this page or give us a call!